SEEKING WORK | Remote (based in Denver, Colorado, USA)
EMBEDDED FIRMWARE and HARDWARE
Got an embedded programming or hardware design challenge you need solved? I'll solve it!
15 years of experience consulting, and I've seen it all; for the past decade I've been exclusively consulting independently. Past clients have included companies large and small, with everything from green-field ideas for new products to tricky situations with existing products they needed fixed. Comfortable working under regulatory constraints; many of the projects I've worked on have been medical devices.
C is my bread and butter on the embedded side, and Python is my go-to for developing PC utilities and scripts, but I'm comfortable working in a lot of languages from assembly all the way up to Javascript when needed. I can even patch embedded binaries by hand when needed.
Architectures? Well, these days it's mostly ARM Cortex, but I've done everything from 8051 and 6502 to STM8 to PIC16/24 to all of the modern stuff, plus a handful of really obscure things. Specific chip families that I've dealt with a lot lately include STM32, nRF5x, and PIC16, but again, I've successfully worked with MCUs from ST, Nordic, NXP, SiLabs, Renasas, Atmel, Nordic, Microchip, and various other vendors.
Super comfy with Linux, though most of my practice is bare-metal or with true RTOSes.
Bespoke drivers need development? No problem. USB, I2C, SPI, CAN? Yup, all of those and more. BLE, LoRa? Expert. Power optimization for battery operation? That's a specialty of mine: I squeeze out every last nanoamp -- and quantify the improvement.
BS in EE. Designing analog and digital circuits, laying out PCBs, bringing up boards, debugging hardware, simulating designs (including EM simulations for antennas, transmission lines, etc.), and consulting on hardware improvements are all no problem. I have an extremely well equipped EE lab bench, including for RF out to 8 GHz, and am very comfortable doing fine-pitch soldering under a microscope as needed.
US citizen, masters from Stanford. Licensed professional engineer (PE) in Colorado.
Feel free to reach out and let's see if there's a good fit. Thanks!
Got an embedded programming or hardware design challenge you need solved? I'll solve it!
15 years of experience consulting, and I've seen it all; for the past decade I've been exclusively consulting independently. Past clients have included companies large and small, with everything from green-field ideas for new products to tricky situations with existing products they needed fixed. Comfortable working under regulatory constraints; many of the projects I've worked on have been medical devices.
C is my bread and butter on the embedded side, and Python is my go-to for developing PC utilities and scripts, but I'm comfortable working in a lot of languages from assembly all the way up to Javascript when needed. I can even patch embedded binaries by hand when needed.
Architectures? Well, these days it's mostly ARM Cortex, but I've done everything from 8051 and 6502 to STM8 to PIC16/24 to all of the modern stuff, plus a handful of really obscure things. Specific chip families that I've dealt with a lot lately include STM32, nRF5x, and PIC16, but again, I've successfully worked with MCUs from ST, Nordic, NXP, SiLabs, Renasas, Atmel, Nordic, Microchip, and various other vendors.
Super comfy with Linux, though most of my practice is bare-metal or with true RTOSes.
Bespoke drivers need development? No problem. USB, I2C, SPI, CAN? Yup, all of those and more. BLE, LoRa? Expert. Power optimization for battery operation? That's a specialty of mine: I squeeze out every last nanoamp -- and quantify the improvement.
BS in EE. Designing analog and digital circuits, laying out PCBs, bringing up boards, debugging hardware, simulating designs (including EM simulations for antennas, transmission lines, etc.), and consulting on hardware improvements are all no problem. I have an extremely well equipped EE lab bench, including for RF out to 8 GHz, and am very comfortable doing fine-pitch soldering under a microscope as needed.
US citizen, masters from Stanford. Licensed professional engineer (PE) in Colorado.
Feel free to reach out and let's see if there's a good fit. Thanks!
jeff@nesota.com