Hacker News new | past | comments | ask | show | jobs | submit login

Lets see your fancy friction welding work on compound curves you might see on a rocket engine.



"United Launch Alliance applies FSW to the Delta II, Delta IV, Atlas V, and the new Vulcan expendable launch vehicles along with their Cryogenic Upper Stages, and the first of these with a friction stir welded interstage module was launched in 1999. The process was also used for the Space Shuttle external tank, for Ares I until the project was canceled in 2012, The SLS Core which replaced the Ares, and for the Orion Crew Vehicle test article and the current model of the Orion at NASA, as well as Falcon 1 and Falcon 9 rockets at SpaceX.[53] The toe nails for ramp of Boeing C-17 Globemaster III cargo aircraft by Advanced Joining Technologies[7] and the cargo barrier beams for the Boeing 747 Large Cargo Freighter[7] were the first commercially produced aircraft parts. FAA-approved wings and fuselage panels of the Eclipse 500 aircraft were made at Eclipse Aviation, and this company delivered 259 friction stir welded business jets, before they were forced into Chapter 7 liquidation. Floor panels for Airbus A400M military aircraft are now made by Pfalz Flugzeugwerke and Embraer used FSW for the Legacy 450 and 500 Jets[8] Friction stir welding also is employed for fuselage panels on the Airbus A380.[54] BRÖTJE-Automation uses friction stir welding for gantry production machines developed for the aerospace sector, as well as other industrial applications.[55]"

https://en.wikipedia.org/wiki/Friction_stir_welding


We're talking about Apollo. Which rocket engine there was made of aluminum? The F-1 was made of Inconel, the J-2 of stainless steel.




Consider applying for YC's Fall 2025 batch! Applications are open till Aug 4

Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: