> the median distance to the nearest food store for the overall U.S. population was 0.9 miles, with 40 percent of the U.S. population living more than 1 mile from a food store. The median distance to the third-nearest food store for the overall population was 1.7 miles. When the ERS researchers looked at rural food store access, they found that the median distance to the nearest and the third-nearest food store was 3.1 miles and 6.1 miles, respectively.
While I agree that a heat pump can't work with hot water baseboard, there is an alternative.
The alternative is removing the baseboard and with a calculated heat load, replacing with panel radiators which run with much lower temperatures. The retrofit wouldn't be too difficult (compared to ducting) as it would involve running 1/2 inch PEX to each room.
With an air to water heat pump, you typically add a buffer tank that among other things helps keep preheated water warm. It is basically a hot water tank so doesn't last through the night
However for other hydronic applications such as solar water heaters there is typically a thermal storage tank which can help store heat like a battery.
Keep in mind a few things. One is some heat pumps are now operating down around -22*F. Second is geothermal is a water to water heat pump that isn't affected as much by the limitations of air temperature (but has other limitations). Third is radiant heat flooring with tubes in concrete acts as a thermal storage tank. Finally heat pumps for heating work best at low temperature hydronic water and can also be used for other applications such as DHW (domestic hot water) which needs to be at slightly higher temperatures than a buffer tank has.
Huge fan of your product. Was using a different coffee subscription that would always show up late and I'd be without coffee. The scale does work well and I've only had once or twice have coffee show up a day late.
I created a todo thermal printer so that I can write messages whenever I remember something. For example when I'm lying in bed and I remember that I have to do something or reading a book and think that's a great thought that I should look more into someday.
Basically I have a mobile app that I can send a message to a api. Sometimes it's just a note, sometimes it is a todo item.
Then I have a raspberry pi that polls the api for new messages and prints them onto a receipt/thermal printer on my desk. Then every morning I usually look and see if there is a todo item, or more long term item.
I haven't exactly thought of how to store the messages, but basically when the "receipt" gets to CVS level, I rip it off and store it in in a document shelf organizer. Every few months I'll go through the receipt for any long term touch items.
Love that! I want to setup a little thermal printer connected to an endpoint too. Any tips on how to do this the easiest way? are there any prebuilt solutions, or kits?
I just wrote a go program to directly write to the usb via gousb. I wrote the model of receipt printer that I used, but it's a very generic ebay receipt printer. https://github.com/moosilauke18/printodo-worker
Some Star Micronics printers have a built in server that polls an endpoint that can point to any url.
They have different names for similar services. I think the one you want may be called CloudPRNT. I tried it a few years ago and it worked OK (had some issues with reconnecting when it lost the internet connection)
Hmm interesting. Just looked it up. Seems to be that BPA/BPS is the problem with it. It seems like phenol free thermal paper is the answer to that issue, although there isn't a lot of information on what is used instead.
True but in this case he's still using a mobile app. So I assume there's some value in having the tasks individually printed in comparison with just writing them manually and that's what I'm curious about.
In my case, I like the physical representation, but sometimes I only have my phone on me when I think of something. And sometimes at night I don't want to turn on a light to write something down.
I live in southern Vermont and have a lot of dead ash trees. Interesting enough, while there is emerald ash borer 5 miles away from me, it hasn't made it to my property. I had a state forester who specializes in EAB come and take a look and found no evidence of it. Apparently around 2017 there was a drought that affected a lot of the ash trees near me and most have died from that. None of the trees had signs of flecking which is key and he took a look at the firewood and found no evidence. He said that if one ash tree has EAB, all ash trees around it will also be affected. And there are a few very healthy ash trees.
> I live in southern Vermont and have a lot of dead ash trees.
I'm also in Southern Vermont (Readsboro) and have mostly healthy ash trees. Emerald ash borer is presumed to be in the area, but no observed evidence yet right where I am. The foresters we spoke to told us that since it takes several years for trees to show symptoms, we should probably assume that our trees are already infested. We do have some trees that seem to be suffering from another ash disease which is present here: https://www.vtinvasives.org/invasive/ash-yellows.
It's probably worth noting that there are effective treatments if you have individual trees that you want to save. I've been doing a preventative treatment on the trees near with house for the last couple year with Dinotefuran (Safari). It can be applied on the bark (basal trunk spray) in late spring, after the leaves start coming out. It costs about $10 per medium sized tree per year if you do it yourself. It won't save a tree that has already been too damaged, but is believed effective if applied before major signs appear.
Maybe those genetics have an immunity? That's the case with beech trees where I live, they have a tough time but a few survived the plague that swept through them. I wonder how one could test if it's something special about the trees.
https://www.ers.usda.gov/amber-waves/2019/june/u-s-shoppers-...